Detailed Technical Data Sheet: Centrifuge Used for Small Metal Parts

Overview

The centrifuge used for small metal parts is an essential machine for cleaning and finishing small metal components. This machine, powered by 380V, is equipped with a mesh basket and has a diameter of approximately 80 cm. The small metal parts centrifuge is designed to remove debris and improve the surface finish of machined parts, offering effective cleaning through centrifugal force.

Components and Construction

The centrifuge used for small metal parts is composed of the following main components:

• Brand : Not specified, but may be from various manufacturers.
• Model : Generic for small metal parts, powered by 380V.
• Mesh Basket : Made of durable metal, designed to contain and separate small metal parts during the centrifugation process.
• Motor : Powered by 380V, responsible for rotating the basket and generating centrifugal force.
• Structure : Made of steel or resistant material to ensure durability and stability.

Dimensions and Mechanical Characteristics

• Basket diameter : Approximately 80 cm.
• Rotation Speed : Variable depending on the model and application, typically between 500 and 1500 rpm.
• Load Capacity : Depends on the size of the basket and the engine power; generally designed to work with moderate quantities of small metal parts.

Usage Procedure

1. Preparation : Make sure the juicer is properly connected to the power supply and that the mesh basket is fitted and secure.
2. Loading : Insert the small metal parts into the mesh basket. Avoid overloading the basket to avoid compromising performance.
3. Setting : Adjust the rotation speed based on your specific cleaning and finishing needs.
4. Starting : Turn on the machine and let the centrifuge work until the end of the set cycle.
5. Unloading : At the end of the cycle, open the machine and remove the clean metal parts.

Matching accessories

The accessories that can be combined with the centrifuge used for small metal parts include:

• Different Size Baskets : To accommodate various types and sizes of small metal parts.
• Cleaning Materials : For example, plastic or ceramic balls to improve cleaning effectiveness.
• Filters and Sieves : To separate debris and facilitate maintenance.

Mathematical Formulas for Optimal Use

To optimize the use of the centrifuge used for small metal parts , consider the following formulas:

1. Centrifugal Force (F):

   $$F$$

   Where:

   • mm $m$ is the mass of the material (kg).
   • rr $r$ is the radius of the basket (m).
   • ω\omega $\omega$ is the angular velocity (rad/s), calculated as 2πn60\frac{2\pi n}{60} 60 2 πn ​, nn $n$ is the velocity in rpm.

2. Cycle Time (T):

   $$T$$

   Where:

   • VV $V$ is the volume to be treated (m³).
   • FF $F$ is the applied force.
   • kk $k$ is a process efficiency coefficient.

Workable Materials

The small metal parts centrifuge is designed to work with a variety of metal materials, including:

• Steel : For industrial and mechanical components.
• Aluminium : For light and precision parts.
• Brass and Copper : For high quality small parts and specific applications.

Maintenance

To ensure long life and optimal operation of the centrifuge used for small metal parts , follow these tips:

• Lubrication : Regularly check and renew the oil or grease in the engine and bearings.
• Cleaning : Remove small metal parts and clean the drum and the inside of the machine after each use.
• Inspection : Periodically check the condition of the drum and components to detect signs of wear or damage.

Evaluation of used cars

To make sure that the centrifuge used for small metal parts is a good purchase:

• Check the Condition : Examine the machine for signs of wear and damage.
• Check Operation : Test the machine to ensure that it works correctly and that there are no vibrations or abnormal noises.
• Request Documentation : Make sure you have documentation regarding maintenance and any repairs.

Sectors of Use

The centrifuge used for small metal parts is used in various industrial sectors, including:

• Metalworking Industry : For cleaning and finishing small metal components.
• Automotive sector : For the processing of small parts and engine parts.
• Aerospace Industry : For high precision and quality components.

Advantages of Buying a Used Car

Purchasing a used centrifuge for small metal parts can be advantageous for various reasons:

• Lower Cost : Used juicers are generally cheaper than new models.
• Immediate Availability : You can start using the machine immediately without having to wait for the delivery time of a new purchase.
• Value : If well maintained, a used centrifuge can offer similar performance to a new one at a significantly reduced cost.

If you have any other questions or need more details, I'm here to help!

PRICE ON REQUEST.