Technical Data Sheet: LoroCH Sharpener JLM SW

Make and Model

The LoroCH JLM SW is a robust and highly specialized sharpener designed for sharpening saws. Being from 1973, the LoroCH JLM SW represents a piece of historic technology in the sharpening industry, while still maintaining its operational efficiency.

Components and Structure

The LoroCH JLM SW is made up of several key components:

• Structure : The main body of the machine is made of sturdy metal, designed for stability and wear resistance.
• Motor : Powered by 380V, the motor is designed to provide the power necessary for sharpening saws, even large ones.
• Vice : The LoroCH JLM SW is equipped with an adjustable vice that holds the saw steady during the sharpening process.
• Sharpening Disc : Equipped with a sharpening disc suitable for the saw material to be sharpened, the disc can be replaced as needed.
• Adjustment System : Includes different adjustment systems for the sharpening angle and applied pressure.

Measurements and Dimensions

• General Dimensions : The LoroCH JLM SW has compact dimensions, suitable for professional work environments and workshops with limited space.
• Sharpening Disc Size : Typically, the sharpening disc has a diameter of approximately 200-300mm, depending on model specifications.

Mechanical Characteristics

• Installed Power : Powered at 380V, the machine is designed to operate at full capacity without problems.
• Rotation Speed : The rotation speed of the sharpening disc is adjustable, allowing you to adapt the machine to different sharpening needs.
• Reliability : Built to last, the LoroCH JLM SW is resistant to wear and heavy loads.

Use and Procedure

The LoroCH JLM SW is designed to sharpen saws, here is the procedure for use:

1. Preparation : Make sure the sharpening wheel is mounted correctly and that the vise is adjusted to accommodate the saw being sharpened.
2. Turning on : Turn on the motor and adjust the rotation speed of the disc according to the type of saw and the intensity of sharpening required.
3. Sharpening : Place the saw in the vise and bring it towards the sharpening disc in one smooth motion. Adjust the sharpening angle if necessary.
4. Shutdown : Turn off the machine and remove the sharp saw.

Matching accessories

• Sharpening Discs : Replace the sharpening disc depending on the specifications of the saw and the processing needs.
• Lubrication Kit : To keep your disc and motor in good condition, use a compatible lubrication kit.
• Precision Guides : Additional accessories to ensure greater precision in sharpening.

Formulas for Optimal Use

To determine optimal usage parameters:

• Disc Rotation Speed ​​(V) : The speed must be adjusted according to the type of saw and the material. Use the formula: V = (Disc Diameter * π) / Rotation Time.
• Sharpening Pressure (P) : Adjusts the pressure applied to the saw based on the material and sharpening angle for optimal results.

Workable Materials

The LoroCH JLM SW is designed to sharpen saws in:

• Steel : Ideal for saws in hard steel and special alloys.
• Metal Alloys : Can also be used for saws made of wear-resistant metal alloys.

Maintenance

• Cleaning : Keep the machine clean of dust and debris, especially around the sharpening wheel.
• Checking the Disc : Regularly check the condition of the sharpening disc and replace it if necessary.
• Lubrication : Lubricate moving parts and check the oil level in the engine.

Evaluation of used cars

When purchasing a LoroCH JLM SW , check:

• General Condition : Make sure the machine is in good condition with no signs of structural damage.
• State of the Disc : Check the wear of the sharpening disc and the functionality of the vice.
• Engine Operation : Check that the engine works correctly and that there are no abnormal noises.

Sectors of Use

The LoroCH JLM SW is used in:

• Metalworking Workshops : For sharpening saws used in metalworking.
• Industrial Sector : Used in industrial environments where it is necessary to keep saws sharp and in good condition.
• Maintenance and Repair : For workshops that carry out maintenance and repairs of saws and tools.

Advantages of Buying Used

Buying a LoroCH JLM SW offers numerous advantages:

• Economic Savings : The price of a used machine is significantly lower than that of a new machine.
• Reliability : Models like the LoroCH JLM SW are known for their robustness and durability.
• Immediate Availability : The used machine is ready for use without waiting times for production.

This data sheet should provide you with all the information you need to best evaluate and use the LoroCH JLM SW . If you have additional questions or need additional details, let me know!