Used filling monoblock MBF 2001

Manufacturer:
MBF
Model:
16 20 3
Year:
2001
Speed:
3500 bph
Containers:
Glass
Sizes:
0.75 L
Product:
Still wine

Rinser
No. of clamps:
16
No. of treatments:
Single
Filler
No. of valves :
20
Filling type:
Gravity/slight depression
Nozzle type:
Mobile
Capper
Cap types:
Straight cork
No. of heads:
3
Current status:
In production
Accident prevention protections:
Yes
Manuals:
Yes
Rotation direction: Clockwise


Used filling monoblock MBF
2001 Filling monobloc composed as follows:

1) Rinser 16 Clamps with a single treatment

Clamps carousel with electrically variable height

2) Filler 20 taps with light vacuum in the bell,

Filler bell with electrically variable height Spring-loaded

mechanical bottle lifting pistons Tap

level adjustment via central rack

3) Capper 3 Flat Cork Head

With Vacuum And Gas Before Closing

Head Variable In Height Electrically

4) Level control system with logics and controls

Base frame in painted iron and then covered in stainless steel

Accident prevention protections on the entire perimeter of the machine

Bottle entry from the left

Production around 3,500 bots.

now Year 2.001 CE marked

Used until December 2021

N. 3 equipment for bottles

Specifications – used filling monoblock MBF
MACHINE BASE – SYNCHROFILL Automatic group with light depression, construction MBF model SYNCHROFILL 960.16UFT1/960.20LV/360.3R for rinsing, filling and corking wine.

The machine is composed of: Rinser N° 16 fixed nozzle clamps Filler N° 20 taps Capping machine N° 3 cap heads

Suitable for glass bottles with the following dimensions: max ø: 120 mm.

ø min: 52 mm.

max h: 360 mm. h min: 190 mm. Product: wine Production: 3,500 b/h bottle capacity: 0.75 l Straws: ø 15 mm.

Machine base description:
Machine support frame, welded steel structure, sandblasted and protected by several coats of epoxy paint, entirely covered in stainless steel.

The mechanical parts that implement the rotation of the machine are housed inside the frame. Large-sized electric motor, controlled by an electronic frequency converter (inverter).

Manual lubrication with grease nipples.

The grease nipples of the static parts are collected on an easily accessible block. Stainless steel electrical panel, positioned at the side of the machine;

it is complete with: Ø Electromechanics and control buttons

Ø Analogue pressure gauges

Transparent accident prevention guards with stainless steel frames integrated into the base structure.

Each protection is equipped with a safety microswitch.

RINSING TOWER - RINSMATIC
- FIXED NOZZLE for one treatment

General characteristics:

Structure of pliers and various parts entirely in stainless steel.

Rotating spray control manifold in AISI 304 stainless steel and plastic materials for food use.

Annular drain tank for rinse water.

Rinsing fluid shut-off solenoid valve. Rinsing fluid pressure regulator and pressure switch. Required production: 3500 BPH

Bottle size:

0.75 l

Treatment times:

2 Seconds of spraying with sterile water or sterilizing solution

7.5 Seconds of dripping

9.5 Total seconds of treatment.

TECHNICAL DATA Nozzle

type Fixed

Number of clamps