The Fagor 800 ton is a high capacity mechanical press, ideal for sectors that require precision and high power. This is a used machine, but it represents an excellent opportunity for those looking for high-level performance at a reduced cost. The Fagor 800 ton , produced in Germany in 1998, is synonymous with quality and robustness, and continues to maintain outstanding performance thanks to its careful construction and the high quality materials used.
Fagor 800 ton press presents itself as an imposing and robust machine, with a compact and solid structure, perfect for demanding industrial environments. The work surface measures 4500 x 1800 mm , offering ample space for working on large pieces. The hammer, also of the same dimensions ( 4500 x 1800 mm ), guarantees uniform force over the entire work surface, making the machine suitable for precision machining even on complex pieces.
The press is equipped with four connecting rods , a system that allows optimal distribution of force during processing. This design ensures stability and minimizes material deformation, even when working at full capacity. The slide stroke is adjustable up to 500 mm , with a top dead center clearance of 1200 mm , offering great versatility for different types of work.
The mechanical characteristics of the Fagor 800 ton make it a highly reliable and high-performance machine. Among the main specifications we find:
The two sliding tables , one front and one rear, make it easier to position the material, making loading and unloading operations quick and safe.
Using the Fagor 800 ton is relatively simple for those who have experience with machinery of this capacity. Before starting work, it is necessary to adjust the stroke of the slide according to the specifications of the material to be processed. Thanks to the control of strokes per minute (10-30 cpm), it is possible to set the optimal speed for precision machining or faster production, without compromising the quality of the piece.
The slide adjustment system (200 mm) and the 1200 mm clearance at TDC allow a wide range of processes, from cutting to bending thick or thin metals, up to the forming of complex components.
To optimize the use of the Fagor 800 ton , it is possible to combine accessories such as automatic lubrication systems, electronic stroke per minute control devices and cooling systems to extend the life of the components.
One of the fundamental mathematical formulas for optimal use of the machine is the following:
E=F⋅d2E = \frac{F \cdot d}{2}
Where:
This formula helps you calculate the energy required for a specific operation, allowing precise adjustment of the machine based on the characteristics of the material.
The Fagor 800 ton is capable of processing a vast range of materials, from the most common metals such as steel, aluminum and copper, to special alloys and composite materials. The force of 800 tons allows you to carry out stamping, forming and cutting operations even on highly resistant materials.
Like any industrial machinery of this caliber, maintenance of the Fagor 800 ton is essential to guarantee its durability and efficiency. It is important to perform periodic checks on components such as the connecting rods, hammer and lubrication system. Cleaning the countertop and monitoring oil levels are daily tasks that should not be overlooked.
In terms of safety, the press must be equipped with adequate protection systems, such as light curtains and emergency stop buttons. If the machine does not comply with CE standards, it is possible to adapt it by installing modern safety systems, such as control PLC or safety systems that comply with current regulations (ISO 13849-1 and EN 692 for mechanical presses).
To understand if a Fagor 800 ton is a good deal, you need to check the condition of the main components: the connecting rods, the ram, the work surface and the slide adjustment system. A machine with limited wear or with recently replaced components is certainly an excellent investment. It is also advisable to check actual working hours, maintenance certificates and any technological updates.
The Fagor 800 ton finds application in various sectors, including the automotive industry, the production of large metal components and the construction of metal structures. Thanks to its versatility and power, it is perfect for high-precision stamping and forming operations.
Fagor 800 ton baler is always an excellent deal for several reasons: you get a high quality machine at a much lower price than new, the machine is already run in, which means fewer technical problems, and finally, thank you with the wide availability of spare parts and accessories, it is possible to keep it in excellent condition for many years
Always stay updated
