Used PE Adhesive Universal M 8T Labeling Machine year 1998 - 7000 bph

The rotary adhesive PE labeling machine is a machine that can apply both adhesive labels and glue labels.

In this specific case the machine applies the stickers and therefore each label corresponds to an adhesive station. This allows you to apply a minimum and maximum size that is usually specified by the manufacturer: This is for both the adhesive station and the PE rotary adhesive labeller. How it works:

At each adhesive station we always find a slide on which the adhesive groups rest and these are of different types:

In particular they can have 3 or 5 axes depending on the different inclinations of the labels with respect to the bottle.

The central part of the used adhesive PE labeller is composed of a cam in an oil bath in which the paints flow.

These can be normal or shaped plates or with the notch centered on the bottom. If necessary they can be replaced by an electronic cam with movements under each plate. However, this means that the entire electrical system and the machine cabinet have to be rebuilt.

There may also be optical centering connected to the electronic cam. In the lower part of the machine there are gears and motors, in the upper part there are the bottle slots (plates).

The rotary labeler rotates in phase with the screw for the mechanical introduction of the containers called SCREW. Round and square bottles fit correctly into the machine and are labeled. There are photocells both before and after entering the labeller which also provide the electrical consents to operate the controls.

The operator panel is analogue, easy to use and intuitive with all functions well specified.

The operator will have ease of use with this type of panel and this allows for less hassle or problems during production. Each bottle format has its own dedicated equipment to convey it into production.