Used stopper Tetra Pak Helicap 23 6000 BPH The Used Pass Tetra Pak Helicap 23 6000 BPH Apply plastic screw caps on cardboard packaging. In particular, Tetra Pak produced this model in 2007 and configured it for the 1000 Slim format. The Slim format, widely used, has a rectangular profile and a reduced section. Consequently, it optimizes the packed liquids by improving the stability of the shelf and reducing the consumption of material. Technical specifications of the Used stepter Tetra Pak The Helicap 23 model applies the CAP 47 screw cap, which guarantees a hermetic closure and allows easy opening for the consumer. In addition, the screwing system maintains a constant torque so that no losses or packaging defects occur. The Used stepfather Tetra Pak Helicap 23 6000 Bph works with a diet at 400/230 V ca, which means it supports both three -phase industrial networks and configurations with neutral and earth. In addition, its electrical system works with frequencies of 50/60 Hz, thus adapting to the different power standards. The main 20th (adjustable) fuse regulates the maximum absorption, while the control circuits work at 24V DC, ensuring a safe voltage for the operation of the machine. From the pneumatic point of view, the system requires compressed air to a pressure between 6 and 7 bar. Consequently, this pressure allows the correct functioning of the stopping and handling of caps mechanisms.