Manual shears 1000 x 1

General Description

The Manual Shears 1000 x 1 is a used machine designed for cutting thin sheet metal. This model is ideal for small laboratories and artisan workshops that need efficient and easy-to-handle equipment. Visually, the Manual Shears has a compact and robust design, with a painted steel structure that guarantees resistance and durability over time.

Components and Construction

The 1000 x 1 Manual Shear is made up of several fundamental elements:

• Supporting structure : made of steel, it offers stability and support during cutting operations.
• Cutting Knives : An upper and lower knife, designed to ensure precise cuts on materials up to 1mm thick.
• Operating handle : allows the operator to exert the force necessary to carry out the cut.
• Support base : a flat surface on which to place the material to be cut, equipped with calibrated measurements to facilitate alignment.

Technical Specifications

• Cutting length : 1000 mm.
• Cutting capacity : 1 mm for mild steel.
• Weight : approximately 250 kg.
• Overall dimensions : 1200mm x 600mm x 1000mm (length x width x height).

Usage Procedure

Using the 1000 x 1 Manual Shears is quite intuitive:

1. Preparation : Check that the machine is in good condition and that the knives are sharp.
2. Positioning the material : Align the sheet metal on the support base, making sure it is still.
3. Operating the machine : Hold the handle and apply constant pressure to make the cut.
4. Removing Material : Once cutting is complete, carefully remove material.

Compatible Accessories

The Manual Shears can be enriched with various accessories, including:

• Alignment guides : to facilitate the positioning of the material.
• Additional supports : to hold the material in place while cutting.
• Safety devices : to reduce the risk of accidents during operation.

Optimal Use Parameters

To maximize the efficiency of the 1000 x 1 Manual Shear, it is important to consider some factors:

• Shear force : The applied force must be sufficient to overcome the resistance of the material. In general, the formula can be used: F=σ⋅AF = \sigma \cdot A $$F$$ $$=$$ $$\sigma$$ $$\cdot$$ $$A$$ where FF $F$ is the force, σ\sigma $\sigma$ is the resistance of the material and AA $A$ is the cross-sectional area to cut.
• Cutting speed : must be constant and suitable for the type of material to guarantee a clean cut.

Workable Materials

The Manual Shear 1000 x 1 is designed to work with:

• Mild steel : up to 1 mm.
• Aluminium : for similar thicknesses.
• Plastic materials : such as PVC, which do not exceed 1 mm in thickness.

Maintenance

Regular maintenance is crucial to ensure the longevity of your Manual Shears:

• Checking the knives : Check for wear and sharpen when necessary.
• Lubrication : Apply oil to friction points to reduce wear.
• Cleaning : Remove residual material after each use.

Safety Regulations

To ensure safety when using the Manual Shears 1000 x 1, it is essential to follow some guidelines:

• Make sure the machine is equipped with adequate protection.
• Wear personal protective equipment (PPE), such as gloves and glasses.
• Check that the machine complies with CE regulations. If there are no indications, it is necessary to adapt the machine following the regulations in force, for example by installing protections and emergency devices.

Evaluation of used cars

To evaluate whether it is a good used one, consider:

• General conditions : Check the condition of the machine and the wear of the parts.
• Documentation : Make sure you have maintenance records.
• Operational test : Carry out a test to evaluate the efficiency of the machine.

Sectors of Use

The Manual Shear 1000 x 1 is suitable for different sectors, such as:

• Craftsmanship : for the processing of small pieces and prototypes.
• Construction : for cutting light sheet metal and components.
• Light industry : where precision and easy handling are required.

Advantages of Buying Used

Buying a used Manual Shears offers notable advantages, including a reduced price compared to new ones. Furthermore, the immediate availability and the possibility of testing the equipment before purchasing are elements that make this choice advantageous for those who want to optimize costs.

Conclusion

In summary, the Manual Shear 1000 x 1 is a versatile and practical machine for cutting light materials. With the right maintenance and compliance with safety standards, it can guarantee high performance over time, making it an ideal choice for artisans and small businesses.

USED ​​MACHINE
INTERNAL CODE: SVR 222