Plasma Cutting Mod. 70/35 ELETTRO Three-Phase Inverter Generator for Sheet Metal - Unmissable Opportunity Used Never Used

If you are looking for a plasma cutting generator , the Plasma Cutting Mod. 70/35 ELETTRO is the ideal solution for you. It is a three-phase machine with inverter technology, designed for cutting thick sheet metal and ferrous materials , but above all a new machine , never used, which represents a unique opportunity for operators in the sector. If you need a tool that guarantees high quality, efficiency and optimal performance, the Plasma Cutting Mod. 70/35 ELETTRO is an opportunity you cannot miss.

Technical Characteristics of Plasma Cutting Mod. 70/35 ELECTRO

The Plasma Cutting Mod. 70/35 ELETTRO three-phase plasma cutting , with a cutting capacity that reaches 35 mm on ferrous materials, but can still be used for greater thicknesses, with the right cutting technique . This device is equipped with an innovative inverter , which guarantees an extremely precise cutting process, with low energy dispersion, allowing you to obtain a clean cut without burrs.

Main Technical Specifications:

• Cutting power : 70 A.
• Maximum cutting thickness : 35 mm for ferrous materials.
• Mains voltage : 400 V (three-phase).
• Technology : Inverter , for more precise cutting, less energy consumption and longer consumable life.
• Continuous Operation : Ensures a high duty cycle even during the longest operations, with the ability to work on thick metals without overheating.
• Cutting current : Up to 70 A , ideal for obtaining quick and precise cuts even on hard materials.
• Compact dimensions : Facilitates handling in the workshop, without taking up too much space.
• Thermal protection : Protection system against overheating to ensure safe use even in continuous operations.

Visual and Structural Characteristics

The Plasma Cutting Mod. 70/35 ELETTRO has a compact but robust structure, ideal for being positioned in workshops or industrial environments. The machine is equipped with clearly visible and easy-to-use control panel LED indicators to monitor operating parameters such as cutting current and gas flow. The machine also includes quick couplings for connecting the plasma torch , which makes preparation for use quick and easy.

How to use Plasma Cutting Mod. 70/35 ELECTRO

Using the Plasma Cutting Mod. 70/35 ELETTRO is very simple and intuitive, thanks to its user-friendly interface. Once the machine has been positioned near the material to be cut, simply:

1. Connect three-phase power to the machine.
2. Set the current parameter based on the thickness of the material you intend to cut (up to 70 A for thicker cuts).
3. Connect the plasma torch via the quick coupling.
4. Turn on the system and begin cutting, starting the process with the button on the torch.

The generator in inverter ensures a constant flow of current, which allows you to obtain a clean and precise cut, with less waste production compared to traditional cutting systems.

Compatible Accessories

To optimize the use of the Plasma Cutting Mod. 70/35 ELETTRO , it is possible to combine a series of accessories:

• Plasma torch (included with the machine) for cutting materials of various thicknesses.
• Power cables suitable for the three-phase machine.
• Gas regulator for controlling the pressure and flow of shielding gas.
• Spare parts kit : nozzles, electrodes and nozzles for torch maintenance.

Maintenance and Care of Plasma Cutting Mod. 70/35 ELECTRO

Maintenance of the Plasma Cutting Mod. 70/35 ELETTRO is simple and requires only a few periodic operations:

• Cleaning the torch : Remove residual material after each cut to avoid the accumulation of waste which could compromise the quality of the cut.
• Checking the cooling system : Make sure that the cooling components, such as the fan and the thermal protection system, are always free from dust and dirt.
• Replacing consumables : Nozzles and electrodes wear out over time and must be replaced periodically to maintain optimal performance.
• Periodic inspection of the machine : Check for any damage to the structure or wiring, to prevent sudden breakdowns.

Safety Regulations

The MITO 322 TD4 complies with CE , which ensures that all safety specifications are met. It is essential to always follow the safety instructions indicated in the manual, including:

• Using protective glasses to protect your eyes from bright light when plasma cutting.
• Protective gloves to avoid burns and injuries when handling hot materials.
• Protective clothing : Wear heat-resistant clothing and work shoes to avoid injury.
• Gas control : Make sure the gas flow system (argon, oxygen or other) is correctly configured to avoid accidents.

Sectors of Use

The Plasma Cutting Mod. 70/35 ELETTRO is ideal for a wide range of applications, including:

• Metalworking industry : For cutting stainless steel, iron, aluminum and ferrous materials.
• Carpentry workshops : For the creation of metal structures and steel components.
• Automotive : Used to cut metal parts in vehicle repair and manufacturing shops.
• Construction and marine industry : Perfect for cutting sheet metal and metal materials in construction and repair environments.

Why Buy a Used Plasma Cutter Mod. 70/35 ELECTRO

Purchasing the Plasma Cutter Mod. 70/35 ELETTRO represents an advantageous choice for those looking for a professional tool at an affordable price. This machine is new but never used, so it is practically like new. Furthermore, thanks to its inverter technology , it offers superior performance to that of many traditional machines, consuming less energy and guaranteeing more precise results.

Conclusions

The Plasma Cutting Mod. 70/35 ELETTRO is a three-phase generator ideal for professional work on sheet metal and ferrous materials. If you are looking for a plasma cutter , this is an opportunity not to be missed. With its high power , advanced technology and the reliability of the ELETTRO , it represents an advantageous purchase for anyone working in the metalworking sector. Don't miss this opportunity: contact us now for more information!