Used Bardi Complete Bottling Line 960 Bph

In this used Bardi complete bottling line for 5 gallon bottles the decapper is designed to remove the cork from returned bottles.

The PLC manages all automatic and manual functions to allow statistics relating to incoming bottles to be recorded, meaning this unit can be upgraded to recognize and reject potentially contaminated bottles.

A combination of digital camera and fiber optic detectors allows bottles returned under the following conditions to be discarded: Bottles without caps
Caps without plus caps
with only the top left
partially open
Caps not removed
Bardi leak tester

In this complete bottling line Bardi used it is designed to recognize and discard leaking bottles, so the working principle is to pressurize the containers for a pre-determined period of time and measure potential leaks.

The PLC manages all automatic and manual functions and allows you to record the statistics relating to defective bottles:

Reliable and precise leak detection of cracks min.
diameter of 0.2 mm No mechanical stress on the bottle
Automatic waste station
Touch-screen and microprocessor control
Robust stainless steel construction
Bardi Bottle Washer

After 50 years of experience in the washing process, this has used the complete Bardi bottling line, produced in different sizes from 300 to 3,000 bph.

It is able to guarantee the highest level of hygienic quality of bottles on the market, so much so that the factors influencing cleaning performance and treatment time are the result of a personalized washing cycle in terms of number of stations and phases according to Customer's standard and requirements. The recommended washing cycle includes 6 main phases which are as follows:


PREWASH DETERGENT
FIRST RINSE
SANITIZING
SECOND RINSE
FINAL RINSE
TEMPERATURE:

Constant monitoring of the temperature is essential to be able to wash the bottles according to the preset values ​​(between 60 and 65°C) which it means that an alarm stops the washing machine if these pressure set points are not respected and to optimize the washing process, therefore the washing machine is equipped with a high pressure system, this allows the pressure of the washing jet to be increased up to at 6 bar and can be installed on one or more stations of the washing phase and is particularly suitable for bottles that are difficult to clean (hollow handles, shaped bottles)

CHEMICAL %:

Bardi, in collaboration with the main multinational chemical company, has developed a protocol of cleaning in order to guarantee, after the washing treatment, a bottle compliant with international hygiene and health standards and this protocol recommends specific products of different brands, with adequate concentration and temperature of the solution (water + chemical product) for each phase of the washing cycle.

THE MECHANICAL ACTIONS ARE:
Neck Handling

This patented system for gripping the neck of the bottle guarantees important advantages such as: