Technical data sheet: OTI 50 Ton press

Introduction

The OTI 50 ton press is a used machine particularly appreciated for its robustness and precision. Designed for pressing and molding applications, this machine offers excellent working capacity and reliability even when purchased used. Below, we will explore in detail the technical features, how to use, and best practices for maintaining and evaluating this press.

Product Description

Brand: OTI
Model: 50 Tons
Type: Hydraulic Press

Components and Materials

• Structure: The OTI press is made with a high-quality steel structure, designed to withstand high stress and ensure long life. Steel offers strength and stability, essential for intense pressing operations.
• Hydraulic Cylinder: Equipped with a hydraulic cylinder to apply the pressing force. The hydraulic system is designed to handle heavy loads and operate with high precision.
• Motor: The 4 HP motor is adequate to power the hydraulic system and provide the power needed for baling operations.
• Control: The press is equipped with a simple but effective control system to regulate the speed and force applied during pressing.

Measurements and Performances

• Pressing force: 50 tons

• Strokes per Minute: 110 strokes/min

• Engine: 4 HP

• Overall Dimensions: Specific dimensions are not always standardized and may vary depending on model and configurations. However, it is important to consider the area occupied by the press, including any spaces for maintenance and operations.

Mechanical Characteristics

• Load Capacity: The OTI 50 ton press is designed to apply a force of 50 tons, sufficient for a wide range of industrial operations.
• Working Speed: With a speed of 110 strokes per minute, this press is capable of managing high productivity operations, increasing processing efficiency.
• Motor: The 4 HP motor provides the power needed to drive the hydraulic system and ensure continuous and reliable operation.

Usage Procedure

1. Preparation: Place the material to be processed on the press table and make sure it is aligned correctly.
2. Setup: Adjust the press parameters using the control system. Set the pressing force and stroke speed according to the job specifications.
3. Operation: Start the press and monitor the process to ensure the material is processed as expected.
4. Verification: After pressing, inspect the part to ensure it meets quality and accuracy requirements.

Compatible Accessories

• Molds and Dies: To adapt to different shapes and sizes of the pieces to be worked.
• Safety Devices: Such as guards and locking systems to ensure safety during operation.
• Cooling System: To manage the temperature of the press during prolonged use and prevent overheating.

Mathematical Formulas for Optimal Use

• Pressing Force (F): Calculated as: F=P×AF = P \times A $F$ $=$ $P$ $\times$ $A$ Where:

  • PP $P$ is the applied pressure in tons.
  • AA $A$ is the contact surface area in mm².

• Pressing Speed ​​(v): Determined by distance and cycle time: v=DTv = \frac{D}{T} $v$ $=$ T D ​Where

  • DD $D$ is the distance traveled in mm.
  • TT $T$ is the time taken in minutes.

Workable Materials

The OTI 50 ton press is designed to process various metal materials, including:

• Steel: For structural and stamping applications.
• Aluminum: For light and malleable pieces.
• Special Alloys: Also suitable for alloys that require precise pressing.

Maintenance and Evaluation of Used Vehicles

• Maintenance: Regularly carry out checks on the hydraulic system, engine and moving parts. Lubricate parts according to manufacturer's recommendations and inspect seals and cylinders for signs of wear.
• Evaluation of Used Equipment: Check that the press is working properly and that all components are in good condition. Check the maintenance history and make sure the machine has been well maintained and repaired when necessary.

Sectors of Use

The OTI 50 ton press is used in several industrial sectors, including:

• Metalworking Industry: For stamping and forming operations of metal components.
• Automotive Sector: In the production and processing of automotive parts.
• Forging Industry: For the creation of forged and pressed parts.

Why Buy It Used and in Good Condition

• Lower Cost: Purchasing a used baler such as the OTI 50 ton can be significantly cheaper than purchasing a new model.
• Immediate Availability: Used machines are often available for immediate delivery, allowing you to start operations without long waits.
• Brand Reliability: OTI is a brand known for the quality and reliability of its balers, ensuring that a well-maintained used machine continues to perform well.
• Value: The OTI 50 ton baler offers excellent value for money, especially when purchased used and in good condition.

Conclusion

The OTI 50 ton press is a versatile and robust machine, designed to handle pressing operations with efficiency and precision. With a capacity of 50 tonnes and a speed of 110 strokes per minute, this press is suitable for a wide range of industrial applications. Buying a used machine like the OTI offers an excellent opportunity to obtain high-quality equipment at a lower cost, with the guarantee of reliable and long-lasting performance.

 PRICE ON REQUEST ITEM CODE 00018