Mion & Mosole shaking pressure substation from 1996

Dimensions 10800 x 6000 x 2400, Made of 25/10 galvanized sheet metal, 8 explosion-proof doors, 2 inspection doors in the hopper and 2 inspection doors in the sleeve room, 4 sight windows , 1 2'' fire ring, 2 900 diameter roof vents with flow correctors and 2 sockets each, for emissions analysis, 2 onion chimneys.
Flow rate 60150 m3/h with 288 fabric sleeves diameter 250 x2400 mm equal to a filtering surface of 477 m2.
And a crossing speed of 2.1 m/s divided into 3 frames equipped with 0.22 Hp motor vibrators each. Fan 1 Centrifugal electro-aspirator mod, Trc diameter 700 with air flow of 32150 m3/h and transmission with 45 kw motor new pneumatic butterfly valve of 700 and pressure manifold
Fan 2 Centrifugal electro-aspirator mod Trc diameter 640 with air flow of 28000 mc/h transmission with 30 kW engine, 640 pneumatic butterfly valve and pressing manifold.
Transfer line Centrifugal electro-aspirator of 200 with 11 kw motor, belt transmission, 300 diameter extraction screw with 3 Hp motor variator, 350 Hp diameter star valve, with 3 Hp gearmotor and bypass with three-phase gearmotor and limit switch for the destination of the chips to the container or other, (silos) complete with closed circuit A/R pipes diameter 200 with auger clogging sensor and transfer pipes.
New electrical panel.

Completely redone in 2016 with Siemens components and ST200 plc, possibly also Toshiba 45 kw inverter. Work to be carried out.
Replacement of fabric sleeves, replacement of auger bearings, replacement of fan bearings, adjustment of eccentric motor vibrators, replacement of rexilon or polyzene plates in the center of the extraction auger. The rest is perfectly in order.